SCT-013-030 Non-invasive AC Current Sensor

Introducing the SCT-013-030 Non-invasive AC Current Sensor Clamp Sensor 30A – a current transformer capable of measuring up to 100 amperes. This sensor, also known as SCT-013-000, provides a non-invasive way to monitor AC current.

By using this SCT-013-030 Non-invasive AC Current Sensor, you can accurately measure currents of up to 30 Amps without disrupting the supply line. This feature makes it a valuable tool for creating your own energy monitor or an over-current protection device for AC loads. Simply attach the current clamp to your desired source and it will generate a slight AC voltage that corresponds to the current. The cable is conveniently equipped with a standard 3.5mm jack on one end, similar to a headphone jack.

Utilize this tool to construct both an energy monitor for monitoring power consumption and an over-current protection device for an AC load. Refer to the provided link for a sample project and consult the datasheet for details on the pinout of the 3.5mm jack. The following technologies are used in front-end applications:

Applicable for the present measurement.
The monitoring and safeguarding of the AC motor…
The equipment used for lighting.
The device that compresses air.

Some of the notable characteristics of this product are:

Distinguishing attributes
Prominent characteristics
Key elements
Distinctive qualities
Transformer that is not invasive.
SCT-013-030 Non-invasive AC Current Sensor is great for a variety of uses, such as powering lighting equipment, AC motors, air compressors, monitoring systems, current measurement devices, and providing protection.
Familiarize yourself with UL94-V0’s flame retardant capabilities.
There are two types of output available: current, and voltage (specifically, the voltage output from the built-in sampling resistor).
There is a non-linearity of Â±3% for input currents ranging from 10% to 120% of the rated amount.
3.5mm Output Plug.