DF-96ED A/B Automatic Water Level Controller Switch

DF-96ED AB Automatic Water Level Controller Switch

Included in DF-96ED AB Automatic Water Level Controller Switch are several characteristics that make it unique and useful.

• Enhanced reliability is achieved through better control.
• AC 10V probe signal can be transmitted up to 500m, ensuring enhanced security.
• With top-of-the-line electronic components, we guarantee a low failure rate and consistent performance.

The specifications for the project are as follows:

• The voltage needed for the operation is 220V.
• The power rating is 1100W.
• Probe at 300 meters away.
• Switching can be done manually or automatically.
• The method of wiring.
• Wiring for the direct control mode.
• The single-phase power supply can control electricity, as long as the power consumption stays within the switch’s rated capacity (10A for resistive load and 5A for inductive load). This allows for direct control mode.
• Wiring in single-phase expansion mode.
• The single-phase power supply must be controlled, ensuring that the power consumption does not exceed the switch’s rated capacity. In order to expand exchanges and contacts, a larger electrical capacity is required.
• The wiring for the three-phase working mode
• The three-phase power supply, which controls the electrical output, necessitates the use of an external AC contactor.
• The wiring for the control contactor coil voltage is AC220V at 50Hz.

Included in the package:

Introducing the DF-96ED AB Automatic Water Level Controller Switch.