XY-L10A 10A 6-60V Lead Acid Solar Storage Charger
Characteristics of XY-L10A 10A 6-60V Lead Acid Solar Storage Charger:
- The voltage range for both Lead-acid and Acting Batteries is 6 to 60 Volts.
- The LCD can simultaneously exhibit the voltage, battery level, and charging duration.
- The function is highly effective as it automatically controls the charging process and can also adjust the charge time. These corresponding parameters can be easily configured and uploaded through the use of a serial port.
- The LCD-based automatic battery charge controller is responsible for a variety of functions.
- The control for automatic charging.
- The rate of charging or discharging is regulated by the Charge Time Control system. The Charge Time Control device manages the speed of both charging and discharging processes.
- Uploading serial data and configuring parameters.
- To determine the voltage percentage, divide the battery voltage by the difference between high and low voltages.
The LCD based XY-L10A 10A 6-60V Lead Acid Solar Storage Charger controller offers a variety of features.
- The charging time recording function will automatically keep track of the full duration of charging. If the user does not activate the charging time control feature, the product will still record the entire charging period. When the entry time display interface is accessed, the charging time will flash on the screen. This function will also be triggered when exiting the display interface or during a subsequent charge (when relay conduction is activated) in an empty state.
- Upon setting the parameters, the system will exit automatically. However, if the voltage falls below volt-LI dn or exceeds volt-HI UP, the display will flash an “ERR” message as a reminder.
- The battery access detection feature is designed to alert the user if the battery is not connected. In such cases, XY-L10A 10A 6-60V Lead Acid Solar Storage Charger will display “NbE” in the downlink as a reminder.
There are no reviews yet.