0.96 INCH 4PIN 128 X 64 BLUE OLED DISPLAY MODULE FOR ARDUINO IIC / I2C

0.96 INCH OLED DISPLAY MODULE

Organic Light-Emitting Diode (OLED) is a highly advanced technology that uses a thin, multi-layered organic film between an anode and cathode to emit light. Unlike LCD technology, it does not rely on a backlight. With its versatile display capabilities, OLED is considered the leading technology for future flat-panel screens.

The included 0.96 Inch OLED Display Module in BLUE can be easily connected to any microcontroller using SPI, IIC, or I2C communication protocols. With a resolution of 128×64, the package comes complete with a display board and pre-soldered 4 pin male header.

This module boasts an OLED monochrome 128×64 dot matrix display. Its features include impressive brightness, self-emitting capability, a sharp contrast ratio, a sleek and thin design, a wide viewing angle, a broad temperature range, and minimal power usage.

• The interface pin for the 4 PIN 128×64 OLED is required.
• The voltage range for VCC is 3.3 volts to 5 volts.
• GND refers to the ground, or the reference point for electrical circuits.
• SCL, also known as the Serial Clock,
• SDA refers to Serial Data.

The 4 pin 128 x 64 0.96 Inch OLED Display Module encompasses various features, such as…

• Introducing the adjustable Super High Brightness feature.
• Experience ultra-high contrast with customizable levels.
• Driver/Controller integrated in
• The display measures 0.96 inches.
• The resolution of this radio is 128 x 64.
• The available interface modes are I2C and IIC.
• The voltage required for operation is 3.3V.
• The SSD1306 is the designated control chip.