200×200, 1.54inch E-Ink display module(B), three-color, SPI interface

1.54-inch e-Ink Paper Display Module

1.54-inch e-Ink Paper Display Module with SPI Interface comes with 200×200 resolution and embedded controller module. It is communicating via SPI interface and it supports partial refresh. As these displays have no backlight panels and it doesn’t need a continuous power supply to display the (static data with periodic intervals) data on the screen, it has a great advantage of ultra-low power consumption. Also, it has a wide viewing angle, great viewing effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features:

• No backlight so keeps displaying last content for a long time even when the power is down
• Ultra low power consumption, basically power is only required for refreshing
• SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
• Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
• Wide viewing angle, great viewing effect under sunlight.

Interface:

• SYMBOL :DESCRIPTION
• VCC :3.3V/5V
• GND :Ground
• DIN :SPI MOSI pin
• CLK :SPI SCK pin
• CS :SPI chip selection, low active
• DC :Data/Command selection (high for data, low for command)
• RST :External reset, low active
• BUSY :Busy status output, high active