16 Bit WS2812 5050 RGB LED full-color

16 Bit WS2812 5050 RGB LED Full Color

Easily distinguishable with its circular black design, the 16Bit WS2812B 5050 RGB LED Full Color Driving Lights Circular Development Board features 16 vibrant smart Neo Pixels arranged in a 68mm diameter PCB.

This set of ring RGB lamps can easily be daisy-chained using the output pin connected to the input pin (DI-DO). With just one chip, you can manage multiple LED lights, as each lamp has its own driver chip for individual control and addressability.

With a -18mA constant current drive, the LED color remains consistent regardless of voltage fluctuations. There is no need for an external resistor to limit the current, making the overall design of the 16 Bit WS2812 5050 RGB LED Full Color and user-friendly. Simply use a 5V power supply to drive the ring.

Defining feature

Using a single wire for communication and incorporating the RGB WS2812B driver chip effectively minimizes the I/O port burden. 16 Bit WS2812 5050 RGB LED Full Color simplifies the peripheral circuit by only requiring a single capacitor. Not only does this provide aesthetic pleasure, but the RGB ring can also be controlled via a single Dout input port. Additionally, multiple RGB lights using the same chip can be cascaded without any restrictions on their shape.

Included in the package are various notable characteristics of 16 Bit WS2812 5050 RGB LED Full Color:

• The sole power source is shared by both the control circuit and the LED.
• The 5050 components come equipped with an integrated control circuit and RGB chip, allowing for complete control of the pixel point.
• The built-in signal reshaping circuit prevents the accumulation of wave form distortion by reshaping the wave before passing it on to the next driver.
• 16 Bit WS2812 5050 RGB LED Full Color includes both a built-in electric reset and a power lost reset.
• Every individual pixel in the three primary colors has the capability of achieving a full spectrum of 256 brightness levels. This allows for a display of over 16 million vivid colors and a rapid scan frequency of at least 400Hz/s.
• This means that a single line is being used to transmit the signal in a cascading manner through multiple ports.
• When the refresh rate is set at 30fps, the cascade number must be equal to or greater than 1024 points.
• Transmit data at a rate of 800Kbps.
• The light maintained a strong level of consistency in its color.
• The full-color module includes soft lights and a lamp strip.
• LED decorative lighting, as well as indoor and outdoor LED video screens with a unique irregular design.