16 Kinds of Sensor Kit for Raspberry Pi
If you are Raspberry pi user and frequency need various sensors to explore the all possible project with Raspberry Pi 3 & Raspberry Pi 2 Model B. Here is 16 Kinds of Sensor Kit for Raspberry Pi in which you will get 16 different sensors compatible with the raspberry pi.
these are the 16 Kinds of Sensor Kit for Raspberry Pi
Following is some brief info about 16 Kinds of Sensor Kit for Raspberry Pi:
KY-008 laser sensor module:
- Operating voltage :5V
- Specifications :5 * 24 mm
- Light source wavelength :650 nm
Obstacle avoidance sensor module:
- VCC :3.3V-5V external voltage (can be directly connected to the 5v and 3.3v microcontroller MCU)
- GND :External GND
- OUT :Small board digital output interface (0 and 1)
- Connection method :VCC-VCC; GND-GND; OUT-IO
- Board size :3.2 x 1.4cm
Flame sensor module:
- Operating voltage :3.3V-5V
- Output form :DO digital switching output (0 and 1) and AO analog voltage output
- Size :3.2cm x 1.4cm
- Detect flame or wavelength range (approx) :760 nm to 1100 nm, lighter flame test distance is 80cm, the greater flame, the farther test distance
- Detection angle is about 60 degree :particularly sensitive to flame photometry
Adjustable sensitivity
4.315M wireless transceiver module:
- Operating voltage :DC5V
- Quiescent current :4mA
- Receiving frequency :315MHz
- Receiving sensitivity :-105DB
- Size :30 x 14 x 7mm
Emission head parameters:
- Transmission distance :20-200 meter (different voltage, different effect)
- Operating voltage :3.5-12V
- Dimension :19 x 19mm
- Work :AM
- Transfer rate :4KB / S
- Transmitting power :10mW
- Transmission frequency :315M
- Pinout left → right :(DATA, VCC, GND)
One channel TCRT5000 tracing module:
- Detection distance :about 10mm
- Operating voltage :5V, black line output low level, white line output high level
Vibration sensor module
- Operating voltage :3.3V-5V
- Output type :Digital switching output (0 and 1)
- Small PCB board size :3.2cm x 1.4cm
MQ-2 gas sensor module:
- Dimension :32 x 22 x 27mm
- The main chip :LM393, ZYMQ-2 gas sensor
- Operating voltage :5V DC
- Dual signal output (analog output, and TTL level output)
- TTL output valid signal is low level. (When the output low level signal light can be directly connected microcontroller)
- Analog output: 0 ~ 5V voltage, the higher the concentration the higher the voltage.
Sound sensor module:
- Operating voltage :3.3V-5V
- Small PCB board size :3.4cm x 1.6cm
DHT11 temperature and humidity sensor module:
- VDD :3.3-5.5V DC
- DATA :Serial data
- NC :No connection
- GND :Grounding, negative power supply
HC-SR04 ultrasonic sensor module:
- Operating voltage :5V
- Ultra-small quiescent current :less than 2mA
- Induction angle :not more than 15 degrees
- Detection distance :2cm-400cm
- High precision :up to 0.3cm
There are no reviews yet.