This is a updated Improved Compatible version for the R305 Finger Print Sensor Module
R307 Fingerprint Module consists of optical fingerprint sensor, high-speed DSP processor, high-performance fingerprint alignment algorithm, high-capacity FLASH chips and other hardware and software composition, stable performance, simple structure, with fingerprint entry, image processing, fingerprint matching, search and template storage and other functions.
Difference Between R305 and R307 Finger print module:
-Same software protocol as R305 with many improvements R305 R307
-Storage Capacity (Fingerprints) 250 1000
-3.3V Operation No Yes
-USB Operation No Yes
-Finger Detect Output No Yes
R307 is a finger print sensor module with TTL UART interface. The user can store the finger print data in the module and can configure it in 1:1 or 1: N mode for identifying the person.The FP module can directly interface with 3v3 Microcontroller. A level converter (like MAX232) is required for interfacing with PC.
The R307 fingerprint module has two interface TTL UART and USB2.0, USB2.0 interface can be connected to the computer; RS232 interface is a TTL level, the default baud rate is 57600 , can be changed, refer to a communication protocol ; can And microcontroller, such as ARM, DSP and other serial devices with a connection, 3.3V 5V microcontroller can be connected directly. Needs to connect the computer level conversion, level conversion note , embodiments such as a MAX232 circuit.
Pinouts:
-Pin# Pin Name Details
-1 5V Regulated 5V DC
-2 GND Common Ground
-3 TXD Data output – Connect to MCU RX
-4 RXD Data Input – Connect to MCU TX
-5 TOUCH Active Low output when there is touch on sensor by finger
-6 3.3V Use this wire to give 3.3V to sensor instead of 5V
USB Cable Connections are 5V/D /D-/GND (Optional)
There are no reviews yet.