5MM 3PIN Flame Detection Sensor ModuleÂ
- 5MM 3PIN Flame Detection Sensor used to detect flames.
- Regarding the product, it has been carefully crafted to meet high standards and fulfill all of your needs.
- 5MM 3PIN Flame Detection Sensor responsible for detecting flames is known as the flame sensor.
- Our plan of action
- Our method involves using a flame sensor to detect the presence of a flame.
- The necessary hardware and software.
- In terms of equipment, we have everything you need.
- One unit of flame sensor
- One Arduino board is included.
- There is one power supply available.
- Berg pins – As needed
- The program is user-friendly and has a simple interface, making it easy for anyone to navigate.
- The Arduino was designed for artists, designers, and hobbyists to create interactive projects without the need for extensive electronics knowledge. The microcontroller boasts a user-friendly interface and a vast community of makers who share their creations and knowledge.
The source of our software can be found at…
The official website for Arduino is a valuable resource for all things related to the platform.
Further information on the product’s specifications and functioning:
- The 5MM 3PIN Flame Detection Sensor provides both analog and digital output.
- The Flame Sensor is capable of detecting both fire and other light sources with wavelengths between 760nm and 1100nm.
- 5MM 3PIN Flame Detection Sensor contains a pair of LED lights: the POWER led and STATUS led.
- Should the presence of flame be detected, the LED will illuminate and the output pin will receive a HIGH signal. Otherwise, the blue LED will light up and the pin will remain LOW.
- Voltage range of 3.3V to 5V.
- The Power LED remains constant, emitting a glow when the power is supplied.
- The variable resistor is utilized to adjust the threshold value of the flame.
- The variable resistor is suitable solely for digital outputs.
- The connection remains intact.
- Ensure the arduino board is equipped with adequate power.
- Attach 5v power supply from the arduino to the gas sensor.
- Ground the flame sensor by connecting it to the ground on the arduino.
- 5MM 3PIN Flame Detection Sensor features two output pins, namely analogue or digital.
- Attach either the analog or digital output to the controller.
Steps to follow:
- Transfer the coding to the arduino board as specified by the connections provided.
- To begin, launch the Arduino software on your computer and access the serial window.
- Display any flame to the sensor’s flame module.
- The values can be observed in the serial window of the Arduino software.
Rephrasing:
- The paragraph could be restated to avoid repetition while maintaining the same tone of voice.
- 5MM 3PIN Flame Detection Sensor will provide both analog and digital output, as displayed in the serial window.
The following actions should be avoided:
The connection of VCC and GND must remain constant.
There are no reviews yet.