BM26 Blood Pressure Monitor

BLOOD PRESSURE

DESCRIPTION:
Blood Pressure meter is used to read high pressure, low pressure and pulse rate of human being. In this module those parameters will be obtained as TTL output. Shows Systolic, Diastolic and Pulse Readings. Compact design fits over your wrist like a watch.Digital blood pressure meters typically measure both systolic and diastolic pressures by an oscillometric detection method, using a piezoelectric pressure sensor.
A systolic blood pressure number of 120 or higher, on repeated measurements, is considered to be hypertension, or high blood pressure.
A diastolic blood pressure number of 90 or higher, on repeated measurements, is considered to be hypertension or high blood pressure.

CONNECTION STEPS:
-Connect 5v power supply
-Connect Atmega 8 Tx to TTL Rx
-Connect Atmega 8 Rx to TTL Tx
-Connect GND
-Initially we will get “BP initiated” from module ,
-Then only put the AAA size battery ,
-“$” is given to the device through UART. Only then the meter starts to Pump the meter.
-Then “~” symbol to read the value from module

APPLICATIONS:
-A digital blood pressure monitor follows an automatic mechanism.
-Portable Digital Monitor
-Self measurement can also identify masked hypertension.
-Measurements will be stored in EEPROM IC.