AVR ATMEGA 28pin Mini Project Board
The Atmel AVR ATMEGA 28pin Mini Project Board is a robust platform for developing code and prototyping. It utilizes both ATmega16/32 microcontrollers, which are powerful AVR microcontrollers from Atmel. This board is ideal for a wide range of applications and includes various hardware components to test out the peripheral features of the devices. Additionally, the board boasts a convenient configuration of all microcontroller pins by PORT. It also includes numerous peripherals like LCD, LEDs, and RS232 serial interface on a double-sided PTH PCB board for added durability and reliability.
Characteristics of AVR ATMEGA 28pin Mini Project Board
- Sleek and Convenient Design, Ready for Immediate Use
- Expert PCB Layout Design for EMI/RFI Compliance and Reduced Noise
- Enhance the durability of your PCB with a double-sided design featuring high-quality PTH components.
- The Board is compatible with AVR ATmega16/ATmega32 Microcontrollers.
- External power can be supplied through either a screw terminal or a DC jack.
- The External Power Supply is compatible with a voltage range of 5V to 12V.
- Option to use a standard 9-12V power supply as an adaptor.
- The board is compatible with both LCDs, including 16×2 and 20×4 in 4-bit mode, as well as graphical LCDs.
- The RS-232 interface, which allows for a direct connection to a PC’s serial port, comes equipped with MAX232.
- This particular I2C EEPROM (4K-AT24C04) is installed on the board.
- On the I2C RTC (DS 1307), there is a crystal and battery for onboard use.
- The 7-segment LED display is multiplexed on board eight times.
- The keyboard on board features a 4×4 matrix design with 16 keys.
- This keyboard features a set of 8 user keys, conveniently located on board for easy access during use.
- An 8 LED interface is included on board for I/O testing.
- Located on the 8 DIP Switch while onboard.
- The External interrupt and Reset buttons are both available on board.
- In addition, there is a Potentiometer interface for ADC on Board 2 which includes channels CH1 and CH2.
- The LM358 Op Amp is used in conjunction with the IC DAC0808N on board.
- There are two relays on board, with ratings of 7.5A and 250VAC for one and 7A and 14VDC for the other.
- The interface on the ULN2003 and L293D Motor Drivers are both included on board.
- Featuring a 5×7 dot matrix display onboard.
- The MCP2551 IC serves as the interface for the CAN transceiver on board.
- The interface for the on-board piezo buzzer.
- The PWM Output pin on the board.
- The LDR and NTC Thermistor IC are both on board.
- Bluetooth interface support is available on board.
- Support for the ESP8266 interface is available on board.
- Incorporating Micro SD Card Support on Board.
- Welcome to the XBee Interface on board.
- The ISP connector is used on boardOn a boat we use the ISP connector to connectThe ISP connector is utilized on board, when we are working with our internet service provider.
- The 16 MHz crystal oscillator is installed onboard.
- An onboard LED illuminates to indicate power status.
- The socket connector on board supports both power and serial communication through a MICRO USB TYPE B port.
- Reverse polarity protection for the power supply.
There are no reviews yet.