CP2102 USB to TTL RS232 6 in 1 Convert Module
- Introducing the versatile CP2102 USB to TTL RS232 6 in 1 Convert Module, designed for your convenience.
- TTL Serial Converter
- The USB port is compatible with 232 connections.
- The USB to 485 connection can transmit data between devices quickly and efficiently.
- The TTL can be converted to 232.
- The TTL signal can be converted to 485.
- The range of 232 to 485.
Key aspects of CP2102 USB to TTL RS232 6 in 1 Convert Module:
The CP2102 core chip, known for its superior quality and unmatched stability, outshines other chips like PL2303, FT232, CH341 in terms of performance. Its high-speed capability and reliability make it a top-selling USB to serial module.
The circuit board measures only 3.1cm X 1.8cm, making it extremely compact. It is comparable to a U disk in size and only requires the width of a USB port. This makes it easy to fit into tight spaces, such as side by side with another USB port on a laptop.
CP2102 USB to TTL RS232 6 in 1 Convert Module is fully compatible with 3.3V, which is widely used by high-end microcontrollers such as ARM, STM32, and DSP. However, any additional modules will only be able to operate at 5V levels and do not have the capability to output 3.3V voltage.
The power output of this module allows for easy debugging by connecting it to the microcontroller system. It can be operated with either 5V-500mA or 3.3V-100mA.
The onboard resettable fuse provides overcurrent protection, ensuring that the circuit board and computer are not damaged in the event of a positive or negative short-circuit. If the current exceeds 500mA or there is a short circuit, the fuse will automatically disconnect to restore the circuit to its normal state. This effectively safeguards your computer’s security.
The serial line transceiver indicator will illuminate when sending or receiving data, providing a convenient way to troubleshoot on the board.
The TTL level interface allows for a direct connection with microcontrollers or other embedded devices, including 51, STC, AVR, ARM, FPGA and more, without the need for conversion.
Connect a computer or any other device with a RS232 level interface.
The RS485 level interface enables automatic send and receive control without the need for a transceiver control line. It defaults to the receiving state and switches to the sending status line when data is transmitted.
The Freedom Huzhuan offers four different levels: a special circuit design and the ability to convert between USB, TTL, RS232, and RS485. This can be achieved through a simple switch, making it both convenient and dependable without any interference.
The baud rate for high-speed communications can reach up to 2Mbps.
CP2102 USB to TTL RS232 6 in 1 Convert Module is versatile and supports MSP430 microcontroller BSL downloads through the DTR and RTS signals.
CP2102 USB to TTL RS232 6 in 1 Convert Module utilizes SMT machines and industrial-grade chips, employing advanced placement processes to achieve superior quality. Its manual patch welding method is cost-effective, ensuring a significant difference in performance and stability.
There are no reviews yet.