Disk Read Write Module USB Flash Disk For CH376S
The CH375 USB device mode is fully compatible with the CH372, as it includes all of its features. This mode also supports USB full-speed devices, allowing for communication between an external microcontroller and a USB device through the CH375 using the USB protocol. Additionally, the CH375 firmware has a built-in protocol for processing Mass-Storage devices, such as USB hard disks, flash drives, and U disks. This allows for direct use of these devices by the external microcontroller to read and write data in sectors.
The CH375 has an 8-bit data bus and control lines for read, write, chip select, and interrupt output. These features allow for convenient connection to the system bus of a microcontroller/DSP/MCU/MPU controller. Additionally, in USB host mode, the CH375 offers serial communication through serial input, serial output, and interrupt output for seamless integration with monolithic/DSP/MCU/MPU devices.
The characteristics of Disk Read Write Module USB Flash Disk For CH376S include:
- Integrating CH375B into the system bus of a microcontroller/DSP/MCU/MPU controller is effortless, thanks to its 8-bit data bus and control lines for read, write, chip select, and interrupt output.
- The CH375B enables serial communication through various connections, including serial input, serial output, and interrupt output, for monolithic/DSP/MCU/MPU devices.
- With a simple MCU mount, connecting the 2×8 connector is effortless.
- The jumper can be set to either parallel or serial mode.
- Indicator for the status of the USB.
- The 3.3 V LDO 1117 on board offers a current of 800 mA.
- The hue is blue.
There are no reviews yet.