Characteristics:
-One-button detection fast charge protocol
-Chinese and English switching
-Switch display direction
-QC2.0/3.0
-Built-in 12-bit ADC chip
-Huawei FCP/SCP San sung
General inspection peripheral products:
-Mobile phone 2. Mobile power
-Charger 4. Car Charger 5. Data line
-Electronic component 7. Laptop
Multiple data display on one screen:
-Screen flip
-Data storage
-Fast charge recognition
-Energy capacity detection / intelligent record
-Pre cision measurement
-Standby brightness
-Chinese and English interface
-Wide voltage low internal resistance
-Fast charge
-Free drive upper machine upgrade
Product Pre cision:
-bit accuracy measurement is more accurate
-Power/capacity record (no power loss)
-4 group capacity / power data record
-Histogram / list for easy comparison of data
-Controllable recording switch, automatic recording (can set threshold) or manual recording
-Optional recording time, that is, recording for a period of time (can be set, for example, one hour),automatically stop recording.
-Can set the recording time interval, such as saving 1 time / second or 1 time / 2 seconds
-In the automatic mode, it is not possible to start or pause recording by pressing the button, but when the current ≥ recording current threshold, it is automatically recorded;
-In manual mode, you can start/pause recording by clicking the K1 button, and the recording current threshold at this time does not work.
-In the above two modes, the recording time can be set. For example, if it is set to 1 hour, the recording time will not be recorded after the recording time reaches 1 hour. To continue recording, clear the data.
Capacity, power record interface:
-Voltage measurement
-Current measurement
-Power measurement
-Electricity measurement
-Capacity measurement
-Capacity/charge group code 1 ~ 4
-Boot time
-Recorded time
-Current direction
-Record progress/pause indication
Functional description of this interface:
-Click K2 to turn the page;
-Click the K1 button and the system settings can set the capacity/power record to start manually or automatically.
-When manual: Click K1 to start/pause recording;
-Automatic: Click K1 to not respond;
-Press and hold K1 to clear the currently selected group data to 0.
-long press K2, you can switch to the histogram / table interface.
Histogram:
-The capacity and power are expressed in two colors, the unit is as follows, the measurement length is 65 units, and the calculation formula is as follows
Capacity:
-Red: x, unit :200mAh;
-Yellow: y, unit :2000/65=30.76mAh;
-Capacity :=2000*x 3.07 * y(Wh)
Electricity:
-Blue: x, unit :200Wh;
-Green: y, unit :200/65 = 3.07Wh
-Electricity = 200 * x 3.07 * y (Wh)
Form interface:
-The data of each group can be directly compared according to the data value;
Functional description of this interface:
-Click K1: po-up data clear window. Press K1/K2 to clear the current selected group data to 0/cancel.
-Click K2: Switch group;
-Long press K2: Histogram/table interface switch;
-Long press K1: return to the capacity/power record interface
Fast charging protocols that support detection and triggering are:
-QC2.0 5V/9V/12V/20V
-QC3.0
-Huawei FCP 9V;
-Huawei SCP;
-San sung 9V
Functional description of this interface:
-When no trigger or detection is performed: Click K1/K2 to turn the page for triggering: Select the protocol/trigger type
-Long press K1: Exit the corresponding detection/trigger interface;
-Press and hold K2: Enter/confirm the corresponding detection/transmission interface.
Functional description of this interface:
-Voltage measurement
-Current measurement
-Power measurement
-Fast charge protocol identification form
-Temperature measurement
-/G:D /D- measurement
This interface shows:
-System firmware version;
-Product serial number;
-Current running times of the device;
-User can set parameters
There are no reviews yet.