JDY-10 Wireless Bluetooth 4.0 Module BLE Bluetooth Serial Transparent Module

JDY-10 CC2541 Bluetooth BLE V4 Module

Introducing the JDY-10 CC2541 Bluetooth BLE V4 Module.

Module: Bluetooth 4.0 slave.

The JDY-10 CC2541 Bluetooth BLE V4 Module operates on the bluetooth 4.0 protocol standard with a frequency range of 2.4GHZ, using GFSK modulation and a maximum transmission power of 8db. JDY-10 CC2541 Bluetooth BLE V4 Module can transmit data up to a distance of 80 meters and has low power consumption, compact size, and a reliable signal for stable transmission.

Notable characteristics:

• Assist with the integration of data on both Android and IOS smartphones.
• We strive to maintain low power consumption, with standby current reaching several uA.
• Support peripheral interfaces such as GPIO and UART
• Assist with the execution of AT commands.
• Meets FCC, CE, and other certification requirements

The range of product applications includes various uses.

• LED lighting with bluetooth capability
• Other products, such as motor adjustments, are also available.
• Other products, such as the anti-lost alarm, also fall under this category.
• Sports medicine is an integral aspect of healthcare for athletes and active individuals.
• Appliances of a smaller size
• The realm of vehicle electronics.
• The default settings as configured by the factory.
• The identifier for the service is FFE0.
• UUID feature of FFE1
• The baud rate for the serial port is set at 115200bps.
• The set of instructions provided by the AT command.
• The bluetooth chip can be accessed through the serial port, which utilizes Tx and Rx signal lines, and supports a variety of baud rates for communication.
• The serial port’s default baud rate is 115200bps, so remember to set it at either 2400, 4800, 9600, 14400, 19200, 38400, or 57600.
• Details regarding the instruction set:
• Note: The AT command must be sent and the line must be entered in order for it to take effect. Keep in mind that the module must not be connected for the AT command to work properly. Once the blue is enabled, you can proceed.
• Once the tooth module is connected to the device, the bluetooth module will automatically switch into data transparent transmission mode.