JDY-10 Wireless Bluetooth 4.0 Module BLE Bluetooth Serial Transparent Module

Model :JDY-10 bluetooth 4.0 slave module
Kernel :M0
Communication interface :serial port
Working voltage :1.9-3.6V
Communication distance :100 meters
Working current :90ua
Suspen mode :14 uA
Module is :bluetooth 4.0 slave
JDY-10 transparent transmission module is based on bluetooth 4.0 protocol standard, working frequency range is 2.4GHZ range, modulation mode is GFSK, maximum transmission power is 8db, maximum transmission distance is 80 meters, low power consumption, small size, strong signal, data transmission Stable and other characteristics.

Features:
-Support Android, IOS mobile phone data penetration
-Support low power consumption (standby current can reach several uA)
-Support GPIO and UART peripheral interface
-Support AT command operation
-Can be certified by FCC/CE and other standards

Product application range:
-bluetooth LED lighting
-Motor adjustment and other products
-Anti-lost alarm and other products
-Sports Health Care
-Small appliances
-Automotive Electronics
-Factory default configuration:
-Service UUID: FFE0
-Feature UUID: FFE1
-Serial port baud rate: 115200bps

AT instruction set:
-Users can communicate with the bluetooth chip through the serial port. The serial port uses Tx, Rx two signal lines, and the baud rate is supported.
-Hold 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200. The default baud rate of the serial port is 115200bps.

Instruction set details:
-(Note: You must enter and enter the line when you send the AT command. The AT command can only take effect when the module is not connected. Once the blue is enabled.
-When the tooth module is connected to the device, the bluetooth module enters the data transparent transmission mode)