MT3608 2A DC-DC Step Up Power Module Booster

MT3608 2A DC-DC Step Up Power Module Booster

The MT3608 2A DC-DC Step Up Power Module Booster is a budget-friendly option for increasing input voltage from 2 to 24V to an output of 5 to 28V with a maximum of 2A.

DC-DC boost converters increase the input voltage to a higher level while simultaneously reducing the available current, as the module’s power output cannot exceed its input.

The adjustable boost converter can output between 5.0 and 28V, and can handle a continuous current of up to 1.5A by adjusting input/output voltage settings. In most cases, it can provide 1A with the chosen setting.

As a boost converter, the input voltage needs to be lower than the output voltage.

The device utilizes low ESR bulk ceramic capacitors instead of electrolytic caps, preventing any long-term aging concerns and promoting a more compact packaging.

The MT3608 converter IC comes equipped with built-in safety measures to prevent over-current and excessive heating, automatically shutting down if pushed beyond its limits.

Adjusting the voltage:

• The module features a potentiometer that allows for easy adjustment of the output voltage.
• Rotating the pot in a clockwise direction will lower the output voltage, while rotating it counterclockwise will raise the output voltage.
• The maximum adjustment range is determined by both the input voltage and the load. For example, when using a 9V input at 1A, the upper limit will be approximately 20V.

Connections between modules:

• These are small boards equipped with 4 solder pads for establishing connections.
• VIN is the designated input voltage.
• The VIN- also known as Ground
• The value of VOUT represents the voltage output.
• VOUT- is connected to VIN- on the module as a ground connection.
• The dimensions of the pad are as follows:
• The MT3608 is a DC-DC step up power module with a maximum current output of 2A.

Please keep in mind that

• The maximum input voltage should not be surpassed by the input voltage.
• The maximum current output for both input and output should not exceed 2A.
• Please be aware that the output voltage must exceed the input voltage.

Key elements of MT3608 2A DC-DC Step Up Power Module Booster:

• It boasts a remarkable efficiency of 93%.
• This device is capable of generating a significant level of current.
• The module is cost-effective in converting.
• Adjusting the voltage to achieve your desired increase is a straightforward process.