Nano CH340 Chip with Mini USB Cable
Using the famous Arduino platform, the Nano V3.0 CH340 Chip with Mini USB Cable provides all the functionality of Arduino Uno, but with a smaller size. The Nano CH340 chip with Mini USB Cable is ideal for your small project where you don’t need much pin-outs but the small size is very important for making it look good.
Nano equipped with MINI USB-Serial Chip is cheaper than Nano with FTDI USB-Serial Chip used on older Arduino Nano versions.
Nano Arduino is a small, complete, and breadboard-friendly board based on the ATmega328 (Nano R3). It has more or less the same functionality as the Uno, but lacks only the DC power jack and requires a Mini-B USB cable instead of a standard one.Nano V3.0 CH340 Chip with Mini USB Cable
It can be powered via the mini-USB port, the 6-20V unregulated external power supply (pin 30), or the 5V regulated external power supply (pin 27).
Nano V3.0 is only 43 mm x 18 mm; it has 6 PWM I/Os from a total of 14 digital I/Os, 8 analog inputs, 16MHz clock speed, and 32kB of flash memory.
Features of Nano V3.0 CH340 Chip with Mini USB Cable:
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Support USB download and Power
- Support for external 5V ~ 12V DC power supply
- Support power supply by 9V battery
- Support ISP download
- Automatic reset during program download.
- Power OK blue LED on the bottom.
- Green (TX), red (RX) and orange (L) LED.
- 5V to AREF jumper.
- Auto sensing/switching power input.
- Small mini-B USB for programming and serial monitor (cable not included).
- ICSP header for direct program download.
- Standard 0.1 spacing DIP (breadboard friendly).
- Manual reset switch.
There are no reviews yet.