P160 A POGO PINS

P160 A POGO PINS

P160 A Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they’re handy also if say you want to JTAG program a board that you cant solder headers to – just shove these thin contacts into a 0.1″ pitch IDC programming cable and press it onto the contacts. The Pogo Pins come in different Tip styles – flat, conical, rounded, crown, etc. This pin comes with crown tip. This tip is great for making connections to PCB Test Points and Wires specially for wire wrap posts, even if the contacts are bent or twisted.

The specifications of P160 A POGO PINS

• In the season of spring, enjoy the melodic sounds produced by wire strings plated with luxurious gold.
• The diameter of the P160-E2 needle is 1.3 mm.
• The diameter of the needle tube is 1.36 mm.
• The diameter of the needle rod measures at 0.66 mm.
• The length of the needle is approximately 24.5 mm in total.
• Please note that the pin sets are sold separately, and that the needle sheath has a diameter of 1.32mm.
• The approximate size for the drill is 1.7 mm.
• The test distance should be at least 1.91mm.
• The distance covered by a full stroke is 2.50mm.
• The current rating is 3A.
• The current resistance stands at 50mΩ.
• The plunger is made of beryllium copper that has been heat treated.