RGB Positive 16×2 LCD+Keypad Kit for Raspberry Pi

RGB LCD With Keypad Kit for Raspberry Pi

This LCD1602 RGB LCD HAT with Keypad module is specially made for the Raspberry Pi. It comes with an optional three-colour backlight (red, green, and blue), allowing you to select the most suitable colour for your needs. Additionally, it includes three independent dimming pins that can be combined to produce stunning colours. The display has 16 characters per line and a character size of 2.95×4.35mm (WxH). Moreover, it features a built-in HD44780 LCD controller interface, enabling direct connection with an MCU.

Characteristics of RGB LCD With Keypad Kit for Raspberry Pi:

• This user-friendly LCD screen has the capacity to display 16 characters on two lines. It features a simple blue and white design, making it effortless to navigate.
• The communication is established through the utilization of I2c protocol, requiring minimal wiring for connection to your Pi.
• To simplify the process for individuals, we created a Pi plate that enables control of a 16×2 Character LCD.
• The R-Pi can support up to 3 LED pins for RGB backlight and 5 keypad pins with pull-up resistors, all using just its two I2C pins.
• The great thing is, you won’t actually lose those two pins. That’s because you can easily connect i2c-based sensors, RTCs, and other devices that utilize the I2C bus.
• This pi plate offers a seamless solution for easily incorporating a display without the tedious task of wiring. It’s a great fit for any project seeking to have an independent user interface.
• With the inclusion of four directional buttons and a select button, basic control can be easily achieved without the need for a bulky computer attachment.
• This plate is compatible with both Revision 1 and Revision 2 Raspberry Pi models. It utilizes the I2C (SDA/SCL) pins, allows control of the RGB backlight through a Raspberry Pi GPIO pin, and offers the option to create a breathing effect using soft PWM.
• To prevent them from coming into contact with the metal, it is necessary to place a piece of electrical tape over the USB ports.