Current Clamp Sensor (SCT-013-030, 30A)

SCT-013-030 Non-invasive AC Current Sensor

Introducing the SCT-013-030 Non-invasive AC Current Sensor Clamp Sensor 30A – a current transformer capable of measuring up to 100 amperes. This sensor, also known as SCT-013-000, provides a non-invasive way to monitor AC current.

By using this SCT-013-030 Non-invasive AC Current Sensor, you can accurately measure currents of up to 30 Amps without disrupting the supply line. This feature makes it a valuable tool for creating your own energy monitor or an over-current protection device for AC loads. Simply attach the current clamp to your desired source and it will generate a slight AC voltage that corresponds to the current. The cable is conveniently equipped with a standard 3.5mm jack on one end, similar to a headphone jack.

Utilize this tool to construct both an energy monitor for monitoring power consumption and an over-current protection device for an AC load. Refer to the provided link for a sample project and consult the datasheet for details on the pinout of the 3.5mm jack. The following technologies are used in front-end applications:

• Applicable for the present measurement.
• The monitoring and safeguarding of the AC motor…
• The equipment used for lighting.
• The device that compresses air.

Some of the notable characteristics of this product are:

• Distinguishing attributes
• Prominent characteristics
• Key elements
• Distinctive qualities
• Transformer that is not invasive.
• SCT-013-030 Non-invasive AC Current Sensor is great for a variety of uses, such as powering lighting equipment, AC motors, air compressors, monitoring systems, current measurement devices, and providing protection.
• Familiarize yourself with UL94-V0’s flame retardant capabilities.
• There are two types of output available: current, and voltage (specifically, the voltage output from the built-in sampling resistor).
• There is a non-linearity of ±3% for input currents ranging from 10% to 120% of the rated amount.
• 3.5mm Output Plug.