TP4056 1A Li Ion Micro B USB

TP4056 1A Li-Ion Battery Charging Micro B USB

The TP4056 1A Li-Ion Battery Charging Micro B USB is a compact and lightweight 3.7V lithium battery charger module equipped with an onboard Micro USB interface. This allows for direct charging from a computer USB port, but in the absence of one, an external voltage source can be used at the IN/IN- pads, making it perfect for DIY projects.

Produced using advanced machinery techniques, every module undergoes thorough testing at ainow.in prior to shipment, ensuring superior reliability for optimal functionality. Ultimately, it boasts a unique design specifically suited for charging single lithium batteries.

Additional features of the TP4056 1A Li-Ion Battery Charging Micro B USB include a current monitor, under-voltage lockout, automatic recharge, and two status pins for indicating charge termination and input voltage presence.

Please consider the following information to avoid duplication.

• The overcurrent protection feature is not found on this breakout board.
• To measure the current, place the Ampere meter in series with the 5V input.
• Ideally, the optimal charging current should be 0.37 times the battery capacity.
• The charging cable must have the right thickness and length for proper interfacing.
• Ensure proper connection between the board and battery.
• It is common for people to have a temperature of around 60 degrees when they are working.
• The chip is not affected by input reverse connection, however the battery’s output reverse connection will result in burning out the chip.

Some notable features of TP4056 1A Li-Ion Battery Charging Micro B USB include…

• To indicate the charging status, the RED LED will light up when the device is charging and turn BLUE once it is fully charged.
• Default charging current is set at 1A, but it can be adjusted using the on-board resistor based on the table provided.
• Employing the TP4056 mature charging chip ensures straightforward peripheral circuitry, excellent protective capabilities, and precise charging precision.
• All parts of the patch are manufactured using fully automated machinery.
• The charging current can easily be altered by adjusting the fixed resistors on the circuit board, providing a convenient way to change the output to a range of 100mA-1000mA.