TP5000 charging board lithium ion 3.6 4.2V

TP5000 charging board

TP5000 4.2V/3.6V 1A Lithium Battery Charging Board Charger Module

Description:

• PCB size :21.5*14.5*4.2mm
• Input voltage :DC 4.5-9V(Recommended not to exceed 7V)
• Output voltage :DC 4.2V/3.6V(default 4.2V)
• Output current :1A(Default max)
• LED Indicator :Charging-Red/Green Flashing,Charged-Green
• Features :Charging for Lithium battery(4.2V) and Lithium iron phosphate battery(3.6V)

Switch mode:

• F Welding point ON for Lithium battery and output 4.2V
• F Welding point OFF for Lithium iron phosphate battery and output 3.6V

Adjust output current(need to modify two resistance value on mark SANYA:

• Default weld 1pcs R100(0.1ohm) resistor and output 1A(max)
• Welding 1pcs 0.2ohm resistor next to R100 and output 1.5A(max)
• Welding 1pcs 0.1ohm resistor next to R100 and output 2A(max)
• Removed R100 and welding 1pcs 0.2ohm resistor on its place and output 0.5A
• It requires additional heat sink if output current more than 1A.