FT232H High Speed Multi Function USB To JTAG UART FIFO SPI I2C Module

FT232H Multi Function USB To JTAG Module

Common Uses of FT232H Multi Function USB To JTAG Module:

• A USB connection that can be converted to UART (RS232, RS422, or RS485) on one chip.
• FIFO connectivity via USB
• The device is designed for USB to FT1248 bus.
• The JTAG interface can be connected via USB.
• SPI communication through USB.
• The I2C communication interface can be achieved using a USB connection.
• Transform USB into Bit-Bang technology.
• The Fast Serial Interface allows for a speedy transfer between devices using a USB connection.
• The USB connector serves as a means of connecting the CPU to another device, acting as a form of memory.

The CJMCU-FT232H is a USB 2.0 Hi-Speed (480Mb / s) to UART / FIFO IC that offers configurable options for industry standard serial and parallel interfaces. Additionally, it boasts several advanced features, including:

• USB to serial/parallel ports are available in a range of setups, allowing for single channel usage.
• The chip handles the entire USB protocol, eliminating the need for any USB specific firmware programming.
• This device is compatible with both USB 2.0 and Full Speed, with transfer rates of 480Mbits/second and 12Mbits/second respectively.
• The Multi-Protocol Synchronous Serial Engine (MPSSE) streamlines the design of synchronous serial protocols, such as USB to JTAG, I2C, SPI (MASTER), and bit-bang.
• The UART has a maximum data transfer rate of 12Mbaud, while the data rate for RS232 is restricted by the external level shifter.
• The USB can be used in asynchronous 245 FIFO mode to achieve a data transfer rate of up to 8 Mbyte / Sec.
• This USB allows for synchronous 245 parallel FIFO mode, enabling speedy transfers of up to 40 Mbytes per second.
• FT232H Multi Function USB To JTAG Module Enables a unique half duplex FT1248 interface that offers a customizable bi-directional data bus with options for width (1, 2, 4 or 8 bits).
• Utilizing the CPU-style FIFO interface mode streamlines the design of the CPU interface.
• Option for high-speed serial communication.
• FTDI’s VCP and D2XX drivers are both royalty-free and eliminate the need for USB driver development in most cases.
• Timeout for the adjustable receive buffer.